L0LU0101 Pempek OBP Industrial Power Supply I/O Module
L0LU0401 Pempek OBP Industrial Power Supply I/O Module 24VDC Digitals Inputs Type A
The L0LU Pempek OBP Mining PLC Power Supply combines a mining-duty industrial 24-volt D.C. power supply with a mixture of useful input and output resources.
The power supply takes a 110-volt A.C. Input and provides stable 24-volt D.C. output (up to 75 watts) for supplying other control system modules.
An industry-standard CAN (Controller Area Network) connection is used to allow a host PLC to control relay outputs, read inputs and monitor module status.
Uniquely Keyed Type A connectors to prevent incorrect machine installation.
L0LU
Module Type:
Power Supply + I/O (Relays Analog Inputs / Digital Inputs)
Supply Input:
110VAC (+/- 15%) / 80 Watts
Supply Output:
24VDC / 75 Watts (Max, but reduced when using internal relays)
Data Communications: Pempek OBP CAN (A5/A2)
CAN 2.0B Compatible
Operating Temperature: -20°C to 85°C All industrial components
Inputs 1: 8 x Digital Inputs (110VAC) Embedded Temperature Sensor oMicroprocessor Controlled Sampling
Inputs 2: 8 x Analog Inputs (4-20 mA) Embedded Temperature Sensor oMicroprocessor Controlled Sampling
Output 1: “Pilot Relay” C-Form (NC/NO) (110V / 8A)
Output 2: “Stop Relay” A-Form (NO) (110V / 8A)
Output 3: 2 x A-Form Dual-Relay Series Outputs (with internal voltage monitoring for safety (rated to 16A @ 110VAC)
Output 4: 4 x A-Form Single-Relay Outputs (rated to 16A @ 110VAC)
Connector 1: Pempek OBP A5 (24VDC Output + CAN Bus)
Connector 2: Pempek OBP A13 (110VAC Input + Relay Outputs)
Heavy Duty Enclosure
The enclosure is Electroless nickel-plated mild steel.
Facia is stainless steel.
Mounting brackets are stainless steel.
Fasteners
M5 x 10mm x 4
M4 x 10mm x 8
M3 x 10mm x 12
Mass
4.5kg (10.1lb)